OCTOPUZ Small Changes, Big Impact

自1月份发行以来，我们的团队一直在努力工作，为章鱼发展了巨大的新改进。

We have a number of exciting things still to come later this year. And today, we've launched a new release of OCTOPUZ that focuses on many different areas of our software, with one goal in mind: let's make our OLRP experience even better.

Enhanced usability with Floor-Wall
当使用我们的地板选择方法创建路径时，您现在可以准确地可视化我们如何检测和构建路径。我们还添加了工具以调整您的点击位置后。如果您没有获得第一次期望的道路，那么您现在不需要试用和错误。

In addition, we've designed an improved way to account for minor gaps on your part, so your path can continue more easily.

翻译语句时动态方向
对于您需要将路径转换为零件上的新位置并更改其方向的情况，我们现在可以自动为您执行此操作。使用您的选择位置，我们将自动应用旋转，并带有附加设置，以微调您所看到的旋转角度。

Small changes, big impact
We've made a bunch of small improvements under the hood to improve the performance of OCTOPUZ, particularly when working with very large paths (I'm talking thousands and thousands of points). Most notably, it'll take significantly less time to use Modify and Transform.

We've also made some other changes we'd like you to know about:

• 从Yaskawa的备份中导入焊接语句：weld statements posted from OCTOPUZ for a Yaskawa robot can be imported back into OCTOPUZ via Import from Robot Backups. These motions will come back in as weld statements with tool on/off commands and other welding settings.
• Welding terminology:在UI中的某些位置，我们现在使用焊工类型时使用更熟悉的术语。
• Start and End Offset by Percentage:in Path Settings, “Start Offset” and “End Offset” can now be set using a percentage value, where the path will be offset by that value as a percentage of the entire path. For example, if your path is 100 mm, and you have Start Offset set to 10%, then the path will be 90 mm in length and begin 10 mm in.
• Transform Snap Selection setting:在转换中，现在有一个称为“快照选择”的设置。如果检查了，它将将您的镐头转到附近的边缘或角落。如果未选中，它将不会抢购您的选择。
• 最多转换50份：我们将一次可以创建的最大副本从25增加到50。
• Preview tool for search using laser point and laser camera search:选择手动搜索或自动搜索使用激光点搜索选择时，显示了带有激光工具和行的预览工具。使用激光摄像头启用自动搜索时，显示了带有激光相机工具和激光爆炸的预览工具。
• 喷嘴搜索的其他参数：when creating a Manual Search, additional parameters for a nozzle search can handle cases where the nozzle is not parallel with the surface with which it is making contact.
• Auto Search knows about Start and End:创建自动搜索时，距离参数（一个设置两个路径点之间的最小距离以添加搜索位置的MM值）现在知道并考虑了开始和结束搜索的位置。
• Add Point Distance setting:当通过点编辑器向路径添加新点时，有一个新设置可以在mm中添加距离。该值将在尊重路径方向的同时，将新点远离所选点，该距离等于设定的MM值。
• 线性化各个点：在点编辑器中，可以选择和线性化各个点。
• 自动更新如果更改运动障碍变量：如果在已经包含运动语句的机器人上更改了“工具旅行方向”或“工具提示方向”，则可以自动更新这些现有运动语句以反映新变量值的选项。
• Support for Mastercam 2022:the OCTOPUZ Mastercam interface now supports Mastercam 2022.

现在可以通过Active Octopuz软件计划为所有客户下载此章鱼更新。